FAF Products
Chemical gas-phase cylindrical filters cassette
Product Introduction
FafCarb CG cylinders are thin-bed, loose-fill filters. They provide optimum removal of moderate concentrations of molecular contamination from supply, recirculation, and exhaust air applications. FafCarb cylinders are noted for their extremely low leakage rates.
FafCarb CG cylindrical filters are engineered to provide the highest level of performance in Indoor Air Quality (IAQ), comfort and light-duty process applications. They utilize a high weight of adsorbent per unit airflow with only moderate pressure loss.
To handle various airflow ranges, CG (engineering grade plastic) cylinders are available in three sizes.
Both styles use a base plate holding frame for mounting. Each filter has three bayonet fittings on the end cap, and these locate in the base plate with a simple push-and-turn action similar to installing a light bulb. To ensure a leak-free seal between the cylinder and the base plate, each cylinder is fitted with a performance gasket.
The holding frames are modular and can be assembled to handle any airflow either in Cylinder housings or built up inside air handling units. The cylinders can be oriented for vertical or horizontal airflow.
FafCarb CG cylinders can be filled with a wide range of activated carbon or impregnated media to provide broad-spectrum or targeted adsorption of contaminants, including odors, irritants, and toxic and corrosive gases and vapors.
FafCarb CG
A cylindrical, corrosion-resistant molecular filter filled with activated alumina or activated carbon. They are the most versatile gas-phase air filter installed in supply, recirculation, and exhaust air systems in commercial, industrial, and process applications. The design provides the best total cost of ownership for the removal of corrosive, odorous, and irritant gases.
• Corrosion resistant and low dusting construction
• Inherently leak-free design when installed in dedicated hardware
• Combines highest removal efficiency and lowest pressure drop
• Typical target gases: hydrogen sulfide, VOC's, ozone, formaldehyde, nitrogen dioxide, and other acids and bases
versatile gas-phase air filter installed in supply, recirculation, and exhaust air systems in commercial, industrial, and process applications. The design provides the best total cost of ownership for the removal of corrosive, odorous, and irritant gases.
• Corrosion resistant and low dusting construction
• Inherently leak-free design when installed in dedicated hardware
• Combines highest removal efficiency and lowest pressure drop
• Typical target gases: hydrogen sulfide, VOC's, ozone, formaldehyde, nitrogen dioxide, and other acids and bases
Specifications
Application:
The most reliable molecular filter for high efficiency and long-term control of molecular contaminants in sensitive buildings and process industries.
Filter may also be used in odor removal applications in pulp and paper mills and wastewater treatment plants, or in lighter applications such as airports, cultural heritage buildings, and commercial offices.
Filter Frame:
ABS
Media:
Activated Carbon, Impregnated Activated Carbon, Impregnated Activated Alumina
Gasket:
Double seal, molded TPE
Installation options:
Front access frames and side access housings are available. See related products below.
Comment:
Sixteen (16) cylinders are applied per 24"" x 24"" (610 x 610mm) opening.
Maximum face velocity: 500 fpm (2.5 m/s) per opening or 31 fpm (.16 m/s) per CG3500 cylinder.
Can be filled with any loose-fill molecular media.
Filter performance will be affected if used in conditions where T and RH are above or below the optimum conditions.
Max temperature (°C)：
60
Max Temperature (°F)：
140
