In the aerospace manufacturing workshop of the European Space Agency (ESA), it is required that the aerospace flight to the solar system should be able to maintain life, or may be able to maintain life in a basic evolutionary state, and there are strict restrictions on the maximum number of spores on the surface of the spacecraft; With the improvement of the efficiency of clean room procedures, these limit levels are likely to decrease slowly. Of course, the requirements for clean rooms of other aviation categories are basically the same. Therefore, the European Space Agency requires that the assembly of the spacecraft be carried out in a clean room with a minimum level of ISO 8 (Fed. Std. 209E Class 100000).
Most aviation cleanrooms have unknown microbial deposition rate and surface microbial population, and usually there is no microbiological laboratory that can be put into use immediately.
When building a suitable microbiological laboratory, the first thing to do is to make their clean rooms as sterile as possible.
For this purpose, a temporary laboratory can be built, using a Class 100 (ISO 5) clean workbench, and equipped with a desktop thermostat:
In order to meet these applications, a professional high-efficiency air filtration system is also required in the workshop to protect the equipment from dust under any circumstances and to protect the safety of the staff.
Solution:
FAF high-efficiency filtration series filter, HEPA (0.3 μ m. 99.99% efficiency) is also recognized as a highly effective microbial barrier.
✅ Comply with VDI 6022.
✅ Microbial inert ingredients according to ISO 846.
✅ BPA, phthalate and formaldehyde free.
✅ Chemical resistant inactivators and detergents.
✅ Applicable to the application requirements of clean rooms and equipment in aerospace manufacturing industry.
✅ Compact energy-saving products.
✅ Filter passes 100% scanning test to ensure stable performance.
✅ Can be tested according to EN1822, IEST or other standards.
✅ Each filter is attached with an independent test report.
✅ Ensure zero leakage.
✅ The material does not contain any dopant.
✅ Manufacturing and packaging in a clean room environment.
Through the above measures, various applications in aerospace manufacturing workshops can be effectively realized and the development of aerospace industry can be promoted.
Post time: Mar-13-2023